View Date While Stopwatch Is Running; View Stopwatch Records; Saving Records; Timer / Stopwatch Memory Mode - Oregon Scientific SmartHeart SE120 User Manual

NOTE appears when you are in the stopwatch
display, or when stopwatch is running in the background.
NOTE will flash when you exceed your upper or
lower heart rate limit.
VIEW DATA WHILE STOPWATCH IS RUNNING
During the training period, press MEM / - to toggle
between the following screen displays:
HR* TIMER HR* TIMER
% MHR % MHR
*HR = Heart Rate

VIEW STOPWATCH RECORDS

When the stopwatch training has been paused or
completed, press MEM / - to view the following records:
AVG HR FAT AVG HR IN
TRAINING BURNED ZONE
TIME CALORIES (Time
MAX HR % MHR without exceed-
ing your upper or
lower HR limit)
SE120_M_EN_R7
HR* CALORIES HR* FAT BURNED
% MHR % MHR
AVG HR AVG HR
TIME BELOW ZONE ABOVE ZONE
spent TIME (Time TIME (Time
spent exceed- spent exceed-
ing your lower ing your upper
heart rate limit) HR limit)
15

SAVING RECORDS

When you reset the stopwatch, the watch will
automatically save the time and date of your training
session, average heart rate, exercise time, max. heart
rate, and fat and calories burned.
If the memory is full, the display will show "FULL
MEMORY". Press ST / SP / + or MEM / - to toggle
between the YES or NO delete screens. Press SET to
confirm or MODE to quit without any action.
The memory works on a first in, first out basis. For
example, the oldest memory (i.e., no.1) will be deleted
and the latest memory will become record no.20.

TIMER / STOPWATCH MEMORY MODE

The watch automatically records the timer and
stopwatch training sessions and stores up to 20 sessions.
To view memory records:
• Press MODE to switch to Memory
Mode and view total calorie and fat
burn.
• Press and hold SET to clear the total
calorie and fat burn.
NOTE Total calorie consumption and fat burned is
shown as an accumulated value from the moment the
watch is powered on.
15
2006.4.12, 10:53 AM