Entering And Validating Ipv4 Addresses; Local Administrative Menu - Avaya B189 Installing And Maintaining

The phone displays the Administration Procedures screen and the options that are
available.

Entering and validating IPv4 addresses

The dial pad uses numeric-only entry when an IPv4 address or the subnet mask is entered. On a
touch screen use a single tap. Use an asterisk to place a period within the address being entered.
When you press star (*) on the dial pad with the cursor in one of the three fields towards the left of
the display, the following happens:
• If you enter a valid value a period displays. The space after the field displays a period.
• The cursor moves to the next space.
When you press star (*) with the cursor in one of the three fields to the right side of the display, the
system beeps to inidicate an error and the cursor remains in the field to the right. Pressing the "*"
button while the cursor is in the last (right most) field results in an error beep and the cursor being
left where it is. If you enter all three dots that separate the fields and if the value of each field is
valid, the IPv4 address or subnet mask is complete.
The value of a given field might be invalid when you:
• Enter a digit that makes the value of the first field of an IPv4 address exceed 223.
• Enter a digit that makes the value of the last three fields of an IPv4 address exceed 255.
• Enter a digit that makes the value of any field of a subnet mask exceed 255.

Local administrative menu

Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Craft Procedure
value (in
English)
8021X
ADDR
CLEAR
September 2015
Craft Procedure Purpose
Set 802.1X operational mode
Address information programming
Clear all values to factory defaults
Installing and Maintaining Avaya B189 IP Conference Phone
Comments on this document? infodev@avaya.com
Entering and validating IPv4 addresses
See
Setting The 802.1X Operational Mode
page 28.
Using The pre-installation checklist
page 29 and Changing IP address
information on page 29.
Clearing the deskphone settings
on
on
on page 31.
Table continues...
27