Using The Preinstallation Checklist; Changing Ip Address Information - Avaya B189 Installing And Maintaining

Using the preinstallation checklist

Before performing static programming of address information, verify that the call system meets all
the requirements listed in the Requirements to verify for your network section of the
pre-installation checklist
addition, you must have the values for the following parameters. To prevent data entry errors that
have a negative impact on your network, obtain and print copies of the following parameters for
each subnet:
• The IP Address of the call server.
• The IP Address of the gateway or the router.
• The IP netmask.
• The IP Address of the HTTP server.

Changing IP address information

About this task
Use this procedure to assign a static IP address to the deskphone.
Caution:
Static addressing is necessary when a DHCP server is unavailable. But static addressing has
room for text entry errors. So Avaya recommends that you install a DHCP server and do not use
static addressing.
Use the following procedure to invoke manual address information programming.
Procedure
1. Tap and select ADDR from the Administration Menu screen. The next screen displays the
following fields with the prompt Select address to change.
Static addressing field
IP Address
Call Server
Router IP address
Subnet Mask
HTTP Server
HTTPS Server
September 2015
on page 11. You can skip item 4., as it refers to the DHCP server. In
Field value
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
Installing and Maintaining Avaya B189 IP Conference Phone
Comments on this document? infodev@avaya.com
Using the preinstallation checklist
Creating the
Description
phone IP address (IPADD)
Call Server in use; media server
IP address
Router in use; gateway/router IP
address
IP network mask (NETMASK)
IP address of HTTP File Server in
use
IP address of HTTPS (TLS) File
Server in use
Table continues...
29