Avaya B189 Installing And Maintaining page 40

Troubleshooting
The phone displays the following options: IP Parameters, Quality of Service, and
Miscellaneous.
2. Tap the category that you want to see.
The information for that category is displayed.
Table 1: IP Parameter Values
Name
IP address (Phone)
Call Server
Router IP address
Subnet Mask
HTTP server
HTTPS server
802.1Q
VLAN ID
Static VLAN Test
802.1X Supplicant
Table 2: Quality of Service Parameters
Parameter
L2 Audio
L2 Signaling
Installing and Maintaining Avaya B189 IP Conference Phone
40
System Value
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
cccc
cccc
ccc
System value
n
n
Comments on this document? infodev@avaya.com
Format
Phone IP address, IPADD value.
IP address of the call server
currently in use, otherwise 0.0.0.0.
Up to 15 ASCII characters, the IP
address of the router in use.
Up to 15 ASCII characters,
NETMASK value.
IP address of last HTTP server used
successfully during initialization or
0.0.0.0. if no file server was used
successfully.
IP address of last HTTPS server
used successfully during
initialization or 0.0.0.0. if no file
server was used successfully.
Text string corresponding to the
L2Q value.
Up to 4 ASCII characters. Value is
L2QVLAN text Auto if 802.1Q
tagging is 0 or On if 802.1Q tagging
is 1. If 802.1Q tagging is off (2), this
line is not displayed.
Up to 3 ASCII characters. Value is
VLANTEST value if 802.1Q tagging
is 0 or 1. If 802.1Q tagging is off (2),
this line is not displayed.
Format
L2QAUD,layer 2 audio priority
value.
L2QSIG,layer 2 signaling
priority value.
Table continues...
September 2015