Avaya 9608 Administration page 91

Parameter Name
ICMPDU
ICMPRED
INGRESS_DTMF_VOL_
LEVEL
INSTANT_MSG_ENABLED
INTER_DIGIT_TIMEOUT
IPADD
L2Q
L2QAUD
L2QSIG
Customizable system parameters for SIP-based 9600 Series IP Deskphones
Default Description and Value Range
Value
1 Controls whether ICMP Destination Unreachable
messages will be processed. Values are:
0=DU messages not transmitted
1= DU messages not transmitted in response to
specific events
2= DU message with code 2 will be transmitted in
case of specific events
0 Controls whether ICMP Redirect messages will be
processed. The valid values are:
-12 RFC 2833 Digit event "volume" level. The power
level of the tone, expressed in dBm0 after dropping
the sign. (from RFC 2833 section 3.5 "Payload
Format." Values are: -20 to -7.
1 Enables or disables the Instant Messaging feature.
Values are: 0= Disable, 1 = Enable.
5 This is the timeout that takes place when user
stops inputting digits. The timeout is treated as digit
collection completion, and when it occurs, the
application sends out an invite. Range in seconds
of 1 to 10.
0.0.0.0 IP Address of the deskphone. Range is 7 to 15
ASCII characters (less than the default string
length) defining one IP Address in dotted-decimal
format.
0 Requests 802.1Q tagging mode (auto/on/off).
Values are:
0 = Auto
1 = On
2 = Off
6 Layer 2 audio priority value. Range from 0 to 7.
6 Layer 2 signaling priority value. Range from 0 to 7.
0: Redirect messages will neither be
●
transmitted nor processed when received.
1: Redirect messages will not be transmitted,
●
but received Redirect messages will be
supported according to RFC 1122.
Issue 3 January 2014 87