Avaya 9608 Administration page 49

Parameters set by DHCP in a site-specific option
Parameter
DOT1X
DOT1XSTAT
HTTPDIR
HTTPPORT
HTTPSRVR
ICMPDU
ICMPRED
L2Q
L2QVLAN
LOCAL_LOG_LEVEL
PHY1STAT
PHY2STAT
PROCPSWD
PROCSTAT
REUSETIME
Description
Controls the operational mode for 802.1X. The default is 0
(pass-through of multicast EAPOL messages to an attached PC, and
enable Supplicant operation for unicast EAPOL messages).
Controls 802.1X Supplicant operation. The default value is 0 (supplicant
disabled).
Specifies the path to prepend to all configurations and data files the
deskphone might request when starting up, i.e., the path, relative to the
root of the HTTP file server, to the directory in which the deskphone
configuration and date files are stored. The path may contain no more
than 127 characters and may contain no spaces. If an Avaya file server
is used to download configuration files over HTTPS, but a different
server is used to download software files via HTTP, set the path of the
Avaya server in the DHCP site-specific option, and set HTTPDIR again
in the 46xxsettings.txt file with the appropriate path for the second
server. HTTPDIR is the path for all HTTP operations. The command is
"SET HTTPDIR=<path>". In configurations where the upgrade and
binary files are in the default directory on the HTTP server, do not use
the HTTPDIR=<path>.
Destination port for HTTP requests (default is 80).
IP Address(es) or DNS name(s) of HTTP file server(s) used for file
download (settings file, language files, code) during startup. The files
are digitally signed, so TLS is not required for security.
Controls the extent to which ICMP Destination Unreachable messages
are sent in response to messages sent to closed ports so as not to
reveal information to potential hackers. The default is 1 (sends
Destination Unreachable messages for closed ports used by
traceroute).
Controls whether ICMP Redirect messages are processed. The default
is 0 (redirect messages are not processed).
802.1Q tagging mode. The default is 0 (automatic).
VLAN ID of the voice VLAN. The default is 0.
Controls the severity level of events logged in the local event log. The
default is 3 (error, critical, alert and emergency events are logged).
Controls the Ethernet line interface speed. The default is 1
(auto-negotiate).
Controls the secondary Ethernet interface speed. The default is 1
(auto-negotiate).
Security string used to access local procedures. The default is 27238.
Controls whether local procedures are enabled. The default is 0
(enabled).
Time in seconds for IP address reuse timeout, in seconds. The defaut is
60 (second).
Administering the DHCP Server
Issue 3 January 2014 45