Avaya 9608 Administration page 85

Parameter Name
ENABLE_SECURE_HTTP_FOR
_CONFERENCING_SERVICE
ENFORCE_SIPS_URI
ENHDIALSTAT
ENTRYNAME
EVENT_NOTIFY_AVAYA_MAX_
USERS
Customizable system parameters for SIP-based 9600 Series IP Deskphones
Default Description and Value Range
Value
1 Specifies the security of the AACS communication.
You can assign the following values to this
parameter:
1 Controls the enforcement of SIPS URI with SRTP.
Valid values are:
0 = Allow either SIPS URI for incoming SRTP
media encryption calls and use only SIPS URI for
outgoing SRTP media encryption calls.
1 = Accept and use only SIPS URI for incoming
and outgoing calls with SRTP media encryption.
The value of this parameter must match with the
value of the same parameter on Communication
Manager.
1 Enhanced Dialing Status. Valid range is 0 to 2. If
set to "0" the feature is turned off. If set to "1" it is
partially enabled (dialing rules do not apply for
dialing from Contacts). If set to "2", the
Administering enhanced local dialing feature is fully
enabled (dialing rules also apply for dialing from
Contacts).
0 For an Avaya Aura® Contact Center environment,
this parameter sets the entry name as the Calling
Party Name or the VDN/Skills Name.
Values are:
0 = Use the called party name to populate the Entry
Name field in the Contacts List View Screen
1 = Use VDN or Skill name to populate the Entry
Name field in the Contacts List View Screen
20 The maximum number of participants returned in
the conference event SIP notification. The range is
0 to 1000.
1 for secure
●
0 for insecure
●
Issue 3 January 2014 81