Avaya 9608 Administration page 73

Parameter Name
AUTO_SELECT_ANY_
IDLE_APPR
BAKLIGHTOFF
BCA_BUTTON_RING_TYPE_PE
R_BUTTON
BRANDING_VOLUME
Customizable system parameters for SIP-based 9600 Series IP Deskphones
Default Description and Value Range
Value
0 Automatically selects any idle call appearance for
conference or transfer. The selection of idle call
appearance applies only when the transfer or
conference is initiated from a bridged appearance.
This parameter is ignored if
CONF_TRANS_ON_PRIMARY_APPR is set to 1.
Valid values are:
120 Number of minutes without display activity to wait
before turning off the backlight. Values range from
zero (never turn off) through 999 minutes (16.65
hours).
Each Specifies a list of name-value pairs that indicate
name-value default ring tones or the ring tones that user selects
pair has the for each Bridged Call Appearance administered on
same value the deskphone.
as the
PERSONA
LWAV
parameter
5 The volume at which the deskphone plays the
Avaya audio clip when the user logs in to the
deskphone or unlocks the deskphone. Accepted
values are 1 through 8. 1 is the minimum volume
and 8 is the maximum volume.
0, if an idle bridged call appearance of the
●
same extension is not available, the
conference or transfer fails.
1, if an idle bridged call appearance of the
●
same extension is not available, an idle call
appearance is used.
Issue 3 January 2014 69