Avaya 9608 Administration page 128

Administering deskphone options
System
Parameter Name
VLAN_IN_USE,
L2QSIG,
DSCPSIG
SIP_CONTROLL
ER_LIST
TLSSRVR and
HTTPSRVR
L2Q
POE_CONS_
SUPPORT
124 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
TLV
Name Impact
TIA LLDP MED VLAN_IN_USE - set to the VLAN ID in the TLV.
Network Policy
(Voice Signaling)
If the Layer 2 Priority value in the TLV is not zero,
and if the Application Type is 2 (Voice Signaling),
L2QSIG is set to the Layer 2 Priority value in the
TLV.
If the DSCP value in the TLV is not zero, and if the
Application Type is 2 (Voice Signaling), DSCPSIG is
set to the DSCP value in the TLV.
This TLV is ignored if:
Proprietary Call SIP_CONTROLLER_LIST will be set to the IP
Server TLV Address(es) in this TLV value.
Proprietary File TLSSRVR and HTTPSRVR will be set to the IP
Server TLV Address(es) in this TLV value.
Proprietary 802.1 If TLV = 1, L2Q set to "1" (On). If TLV = 2, L2Q set
Q Framing to "2" (Off). If TLV = 3, L2Q set to "0" (Auto). A
check is made as to whether a reset is necessary to
obtain a new IP address due to a change in the
values of the parameters L2Q or L2QVLAN.
This TLV is ignored if:
Proprietary - PoE If the value of POE_CONS_SUPPORT is "1",
Conservation Level POE_CONS_MODE is set to the level requested in
Request TLV the TLV.
Comments? infodev@avaya.com
the value of USE_DHCP is "0" and the value
●
of IPADD is not "0.0.0.0", or
the Application Type is not 1 (Voice) or 2
●
(Voice Signaling), or
the Unknown Policy Flag (U) is set to 1.
●
the value of USE_DHCP is "0" and the value
●
of IPADD is not "0.0.0.0", or
the current L2QVLAN value was set by an
●
IEEE 802.1 VLAN Name, or
the current L2QVLAN value was set by a TIA
●
LLDP MED Network Policy (Voice) TLV.