Avaya 9608 Administration page 113

Parameter Name
TCP_KEEP_ALIVE_TIME
TEAM_BUTTON_RING_TYPE
TEAM_BUTTON_RING_TYPE_P
ER_BUTTON
TEAM_BUTTON_RING_TYPE_
USER_SELECTION
TIMEFORMAT
TLSDIR
Customizable system parameters for SIP-based 9600 Series IP Deskphones
Default Description and Value Range
Value
60 This time interval is the time 9600 Series SIP IP
Telephones will wait before sending out a TCP
keep-alive message (TCP ACK message) to the
far-end. The time is controlled by the system's
TCP/IP stack. The timer is restarted after
application level data (for example, a SIP
message) is sent over the socket. When the
system is idle, this keep-alive time expires and
results in sending a TCP ACK (keep-alive) packet.
Valid values are 10-3600 (seconds).
1 Specifies the ring tone that the deskphone plays for
all team buttons that the user administered on the
deskphone. The deskphone plays the ring tone that
you assigned to this parameter only if the user
selected Pre-set on the Team Button Ring Type
screen of the deskphone.
You can assign any value from 1 to 8 to this
parameter.
Each Specifies a list of name-value pairs that indicate
name-value default ring tones or the ring tones that user selects
pair has the for each Team button administered on the
same value deskphone.
as the
TEAM_BU
TTON_RIN
G_TYPE
parameter
1 Specifies the numbered ring tone that user
selected, other than pre-set, on the Team Button
Ring Type screen. The deskphone plays the ring
tone that this parameter specifies for all Team
buttons that the user administered on the
deskphone.
The parameter can have any value from 1 to 8.
0 Display time according to defined format in the top
line and in the call log. Values are:
0=am/pm format
1=24h format
" " (Null) Path name for https downloads. Character string of
0 to 127 characters representing a directory name
or path to directory.
Issue 3 January 2014 109