Avaya 9608 Administration page 51

- Option 1 - Subnet mask.
As described in Required network information before installing a DHCP
- Option 3 - Gateway (router) IP Address(es).
As described in Required network information before installing a DHCP
If using more than one address, the total list can contain up to 127 total ASCII
characters. You must separate IP Addresses with commas with no intervening spaces.
- Option 6 - DNS server(s) address list.
If using more than one address, the total list can contain up to 255 total ASCII
characters. You must separate IP Addresses with commas with no intervening spaces.
At least one address in Option 6 must be a valid, non zero, dotted decimal address.
- Option 12 - Host Name.
Value is AVohhhhhh, where: o has one of the following values based on the OID (first
three octets) of the deskphone's MAC address: "A" if the OID is 00-04-0D, "B" if the
OID is 00-1B-4F, (SIP software Release 2.0+), "E" if the OID is 00-09-6E, "L" if the OID
is 00-60-1D, "T" if the OID is 00-07-3B, (SIP software Release R2.0+) and "X" if the
OID is anything else, and where hhhhhh are ASCII characters for the hexadecimal
representation of the last three octets of the deskphone's MAC address.
- Option 15 - DNS Domain Name.
This string contains the domain name to be used when DNS names in system
parameters are resolved into IP Addresses. This domain name is appended to the
DNS name before the 9600 IP deskphone attempts to resolve the DNS address.
Option 15 is necessary if you want to use a DNS name for the HTTP server.
Otherwise, you can specify a DOMAIN as part of customizing HTTP as indicated in
About DNS addressing
- Option 42 - SNTP Server.
This option specifies a list of IP Addresses indicating NTP servers available to the
deskphone. List servers in the order of preference.The minimum length is 4, and the
length must be a multiple of 4.
- Option 43 - Encapsulated vendor-specific options.
This option is used by clients and servers to exchange vendor-specific information.
Option 43 is processed only if the first code is 1 and has a value of 6889. All values
are interpreted as strings of ASCII characters that are accepted with or without a null
termination character. Any invalid value is ignored, and the corresponding parameter
value is not set. Note that since all DHCP options have a maximum length of 255
octets, even though HTTPSRVR, TLSSRVR and SIP_CONTROLLER_LIST can each
on page 117.
Administering the DHCP Server
server.
server, item .
Issue 3 January 2014 47