Memory Recall Function (Driver’s Side Only) - Lexus rx450h Service Manual

Hide thumbs Also See for rx450h:
Table of Contents

Advertisement

Memory recall function (driver's side only)
Each electronic key can be registered to recall your preferred driving position.
Registering procedure
Record your driving position to button "1", "2" or "3" before performing the
following:
Carry only the key you want to register, and then close the driver' s door.
If 2 or more keys are in the vehicle, the driving position cannot be recorded
properly.
Check that the shift lever is in P.
1
Turn the power switch to ON mode.
2
Recall the driving position that you want to record.
3
While pressing the recalled but-
4
ton, press and hold the door lock
switch (either lock or unlock) until
the buzzer sounds.
If the button could not be registered,
the buzzer sounds continuously for
approximately 3 seconds.
Recall procedure
Carry the electronic key that has been registered to the driving position,
1
and then unlock and open the driver' s door using the smart access system
with push-button start or wireless remote control.
The driving position will move to the recorded position (not including the steering
wheel). However, the seat will move to a position slightly behind the recorded posi-
tion in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the seat and
outside rear view mirrors will not move.
Turn the power switch to ACCESSORY mode or ON mode, or fasten a
2
seat belt.
The seat and steering wheel will move to the recorded position.
RX450h_U_OM0E013U
3-3. Adjusting the seats
177
3

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents