To Change The Vehicle-To-Vehicle Distance (Vehicle-To-Vehicle Distance Control Mode); Vehicle-To-Vehicle Distance Settings; To Cancel And Resume The Speed Control - Lexus rx450h Service Manual

Hide thumbs Also See for rx450h:

Table of Contents

Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance

control mode)

Pressing the button changes the vehi-

cle-to-vehicle distance as follows:

The vehicle-to-vehicle distance is set

automatically to long mode when the

power switch is turned to ON mode.

If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.

Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance con-

Select a distance from the table below. Note that the distances shown corre-

spond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance

increases/decreases in accordance with vehicle speed.

Distance options

Canceling and resuming the speed control

Pulling the lever toward you cancels

the speed control.

The speed setting is also canceled when

the brake pedal is depressed.

Pushing the lever up resumes the

cruise control and returns vehicle

speed to the set speed.

However, cruise control does not

resume when the vehicle speed is

approximately 25 mph (40 km/h) or

RX450h_U_OM0E013U

4-5. Using the driving support systems

vehicle mark

Vehicle-to-vehicle distance

Approximately 160 ft. (50 m)

Approximately 130 ft. (40 m)

Approximately 100 ft. (30 m)

Troubleshooting