Recall Procedure; To Stop The Position Recall Operation Part-Way Through; Seat Positions That Can Be Memorized; Operating The Driving Position Memory After Turning The Power Switch Off - Lexus rx450h Service Manual

176
3-3. Adjusting the seats

Recall procedure

■
Check that the shift lever is in P.
1
Turn the power switch to ON mode.
2
Press one of the buttons for the
3
driving position you want to recall
until the buzzer sounds.

To stop the position recall operation part-way through

■
Perform any of the following:
Press the "SET" button.
●
Press button "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Seat positions that can be memorized (P. 164)
■
The adjusted positions other than the position adjusted by lumbar support switch can be
recorded.

Operating the driving position memory after turning the power switch off

■
Recorded seat positions can be activated up to 180 seconds after the driver' s door is
opened and another 60 seconds after it is closed again.
In order to correctly use the driving position memory function
■
If a seat position is already in the furthest possible position and the seat is operated in the
same direction, the recorded position may be slightly different when it is recalled.
RX450h_U_OM0E013U