Changing Settings Of The Pre-Collision System; Enabling/Disabling The Pre-Collision System; Changing The Pre-Collision Warning Timing - Lexus rx450h Service Manual

Changing settings of the pre-collision system

Enabling/disabling the pre-collision system

■
The pre-collision system can be enabled/disabled on
multi-information display.
The system is automatically enabled each time the power switch is turned to ON
mode.
If the system is disabled, the PCS
warning light will turn on and a mes-
sage will be displayed on the multi-
information display.

Changing the pre-collision warning timing

■
The pre-collision warning timing can be changed on
multi-information display.
The operation timing setting is retained when the power switch is turned off.
Far
1
The warning will begin to operate
earlier than with the default timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to operate
later than with the default timing.
RX450h_U_OM0E013U
4-5. Using the driving support systems
283
(P. 109) of the
4
(P. 109) of the