Run the seat belt through the
4
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
5
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
While pushing the child restraint
6
system into the rear seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has retracted
to a point where there is no slack in
the belt, pull the belt to check that it
cannot be extended.
If the child restraint has a top tether strap, follow the child restraint manu-
7
facturer' s operation manual regarding the installation, using the top tether
strap to latch onto the top tether strap anchor. (P. 73)
After installing the child restraint system, rock it back and forth to ensure
8
that it is installed securely. (P. 70)
RX450h_U_OM0E013U
67
1-2. Child safety
1