520
6-3. Do-it-yourself maintenance
Rear turn signal lights (vehicles with single-beam headlights)
■
Open the back door and apply
1
protective tape to the vehicle
body around the taillight.
Use masking tape, etc. Do not use
duct tape, as it may leave residue or
damage the paint when removed.
Using a flathead screwdriver,
2
remove the cover.
To prevent scratching the vehicle,
wrap the tip of the flathead screw-
driver with a cloth, etc.
Remove the 2 screws.
3
RX450h_U_OM0E013U