Replacing A Windshield Wiper Insert - Lexus rx450h Service Manual

504
6-3. Do-it-yourself maintenance
Windshield wiper inserts

Replacing a windshield wiper insert

Change the rest position of the windshield wipers to the service position using
1
the wiper lever and then lift a windshield wiper. (P. 263)
While pressing and holding the
1 2
wiper blade lock release button,
remove the wiper blade.
When performing this operation, make
sure to hold the hook portion of the
wiper arm securely.
While disengaging the cap lock,
3
using a tool such as a flathead
screwdriver if necessary, remove the
wiper insert.
Hold the cap on the end of the wiper
insert when removing the wiper insert.
(The cap is integrated into the wiper
insert.)
If using a screwdriver, make sure to wrap
its tip with tape to protect the wiper
blade.
Install a new wiper insert.
1 4
Make sure to push the wiper insert firmly until the cap lock is engaged.
After installation, check that the cap lock is locked securely.
Install the wiper blade to the wiper arm.
5
Make sure to push the wiper blade until it is locked.
When performing this operation, make sure to hold the hook portion of the wiper arm
securely.
After installation, check that the wiper blade is locked securely.
RX450h_U_OM0E013U
Hook portion
Cap lock