436
5-5. Using the other interior features
If a cover or accessory is attached to the portable device
■
Do not charge a portable device if a cover or accessory which is not Qi compatible is
attached. Depending on the type of cover and/or accessory attached, it may not be pos-
sible to charge the portable device. If the portable device is placed on the charging area
and does not charge, remove the cover and/or accessories.
If interference is heard in AM radio broadcasts while charging
■
Turn off the wireless charger and check if the noise is reduced. If noise is reduced, press
and hold the power supply switch of the wireless charger for 2 seconds. The frequency of
the wireless charger is changed and noise may be reduced. When the frequency is
changed, the operation indicator light will blink (orange) 2 times.
Charging precautions
■
If the electronic key cannot be detected in the cabin, charging cannot be performed.
●
When a door is opened and closed, charging may be temporarily suspended.
While charging, the wireless charger and the portable device will become warm. This is
●
not a malfunction.
If a portable device becomes warm while charging and charging stops due to the pro-
tection function of the portable device, wait until the portable device cools down and
charge it again.
Sound generated during operation
■
When the power supply switch is turned on or while a portable device is being identified,
operation sounds may be heard. This is not a malfunction.
Cleaning the wireless charger
■
P. 463
Certification for the wireless charger
■
FCC Note: This equipment has been tested and found to comply with Part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user' s authority to operate this equipment.
RX450h_U_OM0E013U