Lanier lp145n Hardware Manual page 77

Paper and Other Media
•
The size is supported, but it should be set as a custom size using the control
panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
Tray 1/2 or the Paper Feed Unit (Tray 3/4) do not support custom size.
The following sizes are supported:
• Bypass Tray: approximately 3.94 "-11.70 " in width, and 5.83 "- 23.62 "
in length.
•
The size is not supported.
❖ Paper weight and number of sheets to be set
Tray 1/2
5
Bypass Tray
Paper Feed Unit (Tray 3/4)
Check that the top of the stack is not higher than the limit mark inside the
tray.
66
Supported paper weight
2
64 - 105 g/m (20 - 28 lb.)
2
52 - 163 g/m (16 - 44 lb.)
2
60 - 105 g/m (16 - 28 lb.)
Maximum number of
sheets (plain paper)
2
550 (80 g/m , 20 lb.)
2
100 (80 g/m , 20 lb.)
2
550 (80 g/m , 20 lb.)