Lanier lp145n Hardware Manual page 19

Installing Options
❖ Interior
2
1.
Memory Unit Type D 128MB/Memo-
ry Unit Type E 256MB (SDRAM module)
Install 128 MB or 256 MB SDRAM
module into the controller board slot.
See p.27 "Attaching Memory Unit
Type D 128MB, Memory Unit Type E
256MB (SDRAM Module)".
2.
Optional boards
See p.32 "Attaching IEEE 802.11b In-
terface Unit".
See p.36 "Attaching IEEE 1284 Inter-
face Board Type A".
See p.38 "Attaching Gigabit Ethernet
Board".
Note
❒ You cannot install following options at the same time:
• IEEE 802.11b Interface Unit
• IEEE 1284 Interface Board Type A
• Gigabit Ethernet Board Type A
Reference
For the specifications of each option, see p.134 "Specifications".
8
AQV019S
3.
Optional units
See p.41 "Attaching VM Card Type
D".
See p.43 "Attaching Data Storage
Card Type A".
4.
Printer Hard Disk Drive Type 8100
See p.20 "Attaching Printer Hard Disk
Drive Type 8100".
5.
User Account Enhance Unit Type E
See p.16 "Attaching User Account En-
hance Unit Type E".