Lanier lp145n Hardware Manual page 26

M
Close the connector cover.
Note
❒ Print a configuration page to confirm that the paper feed unit is properly
installed.
❒ If the paper feed unit is not installed properly, reinstall it following this
procedure. If you cannot install it properly even after attempting reinstal-
lation, contact your sales or service representative.
Reference
For printing the configuration page, see "Printing the Test Page", Quick In-
stallation Guide.
For loading paper onto the paper tray, see p.71 "Loading Paper".
When adjusting the printing position, see p.96 "Adjusting Tray Registra-
tion".
AQV010S
Attaching Paper Feed Unit PB 3020
2
15