Attaching Vm Card Type D - Lanier lp145n Hardware Manual

Attaching VM Card Type D

Important
❒ For using the VM card, installing the optional SDRAM module is required. If
the optional SDRAM module is not installed, the printer does not detect the
unit, and also it does not function because of memory shortage.
❒ Protect VM Card Type D from physical shocks.
❒ Using the upper slot is recommended for inserting the unit.
A
Check the package contains the following:
❖ VM Card Type D
B
Turn off the power, and then unplug the power cable.
C
Remove the cover of the expansion card slot.
D
Carefully insert the VM card into the slot, until the card clicks into place.
AET104S
AQV504S
AQV553S
Attaching VM Card Type D
2
41