Setting Up My Mfp - Lexmark x950 series User Manual

Setting up and using the home screen applications
1
Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer control panel home screen. The IP address appears as
four sets of numbers separated by periods, such as 123.123.123.123.
2
Click Settings > Device Solutions > Solutions (eSF) > Scan to Network.
3
Specify the destinations, and then customize the settings.
4
Click Apply.
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on
the printer display.

Setting up My MFP

Icon Description
The application lets you customize your touch‑screen settings and store those preferences in a
flash drive. Each time you want to copy, fax, or scan, insert the flash drive into the USB port of the
printer. All your personal preferences are automatically uploaded, including job settings, home
screen preferences, and address book.
Note: The icon appears only when a flash drive with My MFP settings is inserted into the USB
port of the printer.
To set up My MFP, insert a flash drive into the USB port of the printer, and then follow the instructions on the
printer display to run the setup wizard.
To use My MFP, insert the flash drive into the USB port of the printer when you want to copy, fax, or scan.
Understanding WS‑Scan
Icon Description
The Web Services‑Scan application lets you scan documents at the network printer, and then
send the scanned image to your computer. WS‑Scan is a Microsoft application that is similar to
Scan to Network, but has the capability of sending the scanned image to a Windows‑based
application. To learn more about WS‑Scan, see the Microsoft documentation.
Note: The icon appears on the printer home screen only when there is a computer registered
with the network printer. The computer must have either Windows 8, Windows 7, or Windows
Vista operating system installed.
23