Lexmark x950 series User Manual page 174

Understanding the printer menus
Menu item
Timeouts
Hibernate Timeout
Disabled
1–3 hours
6 hours
1–3 days
1–2 weeks
1 month
Timeouts
Hibernate Timeout on Connection
Do Not Hibernate
Hibernate
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Description
Sets the amount of time the printer waits before it enters
Hibernate mode
Note: 3 days is the factory default setting.
Sets the printer to Hibernate mode even if there is an active
Ethernet connection
Note: Do Not Hibernate is the factory default setting.
Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Sets the amount of time in seconds the printer waits to receive
an end‑of‑job message before canceling the remainder of the
print job
Notes:
•
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed, and then the printer checks to see
if any new print jobs are waiting.
•
Print Timeout is available only when using PCL
emulation. This setting has no effect on PostScript
emulation print jobs.
Sets the amount of time in seconds the printer waits for
additional data before canceling a print job
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Sets the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue
Notes:
•
30 seconds is the factory default setting.
•
This menu appears only when a printer hard disk is
installed.
174