Understanding the printer menus
Network Reports menu
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network Setup > Reports
or Network Reports
Menu item
Description
Print Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP
address
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Network
Card
Menu item
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0
10–225
Banner Page
Off
On
TCP/IP menu
Note: This menu is available only in network printers or in printers connected to print servers.
Menu item
Set Hostname
IP Address
Netmask
Description
Lets you view the connection status of the Network Card
Lets you view the speed of a currently active network card
Lets you view the network addresses
Sets the amount of time in seconds before a network print job is canceled
Note: 90 seconds is the factory default setting.
Allows the printer to print a banner page
Note: Off is the factory default setting.
Description
Lets you set the current TCP/IP host name
Note: This can be changed only from the Embedded Web Server.
Lets you view or change the current TCP/IP address
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto
IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on
systems that support BOOTP and RARP.
Lets you view or change the current TCP/IP netmask
152