Installing A Printer Hard Disk - Lexmark x950 series User Manual

Additional printer setup
7
Firmly connect the ISP solution to the system board cage using two screws.

Installing a printer hard disk

Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the wall outlet before continuing. If you have any other devices attached to the printer, then
turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or
connectors.
1
Access the system board.
For more information, see
2
Unpack the printer hard disk.
"Accessing the system board" on page 27.
35