Hd Seq; Setup Of The Programmable Outputs - EverFocus PARAGON 264x4-16 Instruction Manual

5.9.4 HD SEQ

Figure 5-36 Display Menu – HD SEQ
Step: Sequence order. Cannot be changed.
Camera: Select which camera appears on the current step.
Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds.

5.9.5 Setup of the programmable outputs

Figure 5-37 Display Menu – Matrix SEQ
Matrix: Select the programmable output (1~4) you want to set up.
Sequence: Select whether this programmable output shows a sequence (ON) or a single camera in full
screen (OFF).
Camera: If you have chosen "OFF" in the "Sequence" field, define the camera which shall be displayed in
full screen through the programmable output.
Step: Sequence order. Cannot be changed.
Camera: Select which camera appears on the current step.
Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds.
84