M/T Seq - EverFocus Paragon960 User Manual

6.6.2

M/T SEQ

You can configure up to 40 steps of the sequencing order for the Main / Call monitor. The
Sequence will repeat continuously from step 1 to step 40 until interrupted.
Monitor: Select Main or Call Monitor to configure the sequencing order.
Step: The sequencing order.
Camera: Select a camera for the specific step.
Dwell (sec): Sets up the dwell time between 0 and 60 seconds for each step.
Change: Click to the next page and configure step 21 to 40.
Figure 6-29
98
PARAGON960 x4 32CH