EverFocus PARAGON 264x4-16 Instruction Manual page 73

2. Click again to confirm, then a new sequence number (for the new section) will show on this block and
current and all following blocks will turn to gray. This means this new gray timezone has a new record
mode (No record).
Change the section to different mode (with different color) by clicking on the first (numbered) block of
each section. The color switches from gray -> orange -> blue, every time user clicks the first block of a
section.
3. Repeat clicking on the first block (indicated by a sequence number on it) of any timezone, this
timezone will change from one color to another, which means switching the record mode. The color
switch sequence is gray->orange->blue.
TIP: Up to 6 sections per day can be defined individually!
TIP: Before editing a schedule, decide whether you want to use the schedule via the Express Setup
function or within the Schedule menu. A schedule created in the Schedule menu will be overwritten upon
clicking the "Apply" button in the Express Setup menu!
Schedule Setting from front panel
1. Enter schedule setting mode: press Enter button to enter schedule setting mode. At this time, the
whole editing area at right-down side will be highlighted within a blue frame. See below image.
2. Enter camera selection mode: turn Jog knob to switch to Camera selection mode. When Camera
selection mode is selected, all 16 cameras will be highlighted in a blue frame. See below image.
3. Selecting camera: Turn Shuttle knob to select desired camera to configure. Selected camera number
will be highlighted by a blue frame. See above image.
67