Alarm Output Relay - EverFocus PARAGON 264x4-16 Instruction Manual

The Control Input Contact CTRL IN is defined in I/O Control menu (
konnte nicht gefunden werden.) for following possible functions:
1. Playback: Playback is active as long the contact is closed. This function is helpful in
combination with the "Quickplay" function (
CTRL IN
GND
2. Record: The input switches to Record (or Record Standby) as long the contact is closed.
CTRL IN
GND
3. Armed / Disarmed: If the contact is closed, the DVR will switch off alarm (alarm contact and motion
alarm) operation. System alarm events are always active.
CTRL IN
GND

2.3.3 Alarm Output Relay

The relay outputs provide either Normally Open or Normally Closed dry contacts.
Idle state
Idle state
DVR armed
Output relay in idle state
chapter Fehler! Verweisquelle
chapter 5.4.3)
Playback
Record / Record Standby
DVR disarmed
12
CTRL IN
GND
CTRL IN
GND
CTRL IN
GND