Audio Installation - EverFocus PARAGON 264x4-16 Instruction Manual

For local DVR operation, MAIN monitor connection ist required. Call monitor connection is optional.
The Main monitor can be connected to BNC, Composite, or VGA monitor output.
Note: The connected monitor or other video devices must have a 75 Ohm termination. Connection a
BNC video cable to this output switches off the internal 75 Ohm termination!

2.2 AUDIO INSTALLATION

The Paragon 264x4-16 DVR provides 16 audio inputs and 1 audio output.
The audio inputs are designed for line audio signals 500 mV at 10 KOhm.
ATTENTION: The direct connection of a non-amplified microphone is not supported (a microphone
amplifier is required).
The installation has to be effected with audio coaxial cable and RCA plugs
The output provides a max. 500 mV at 10 KOhm line audio signal and may be connected to e.g. a monitor's
audio input. The direct connection of (passive) speakers is not supported.
10