Table of Contents
Advertisement
Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the DVR will be recognized within the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 1: This field shows the primary DNS server for your network. If DHCP is selected and there is
an active internet connection, this value will be assigned automatically. The correct assignment of this
field is vital if you want to make use of the DDNS function (further details: chapter 4.6.3 – DDNS).
DNS Server 2: This field shows the secondary DNS server for your network.
Apply: Press "Apply" button to save and apply Express settings to DVR. The system will automatically
adjust recording frame rate according to settings. The following message will pop up, press YES to change
Resolution, Recording frame rate and Quality depending on your express setting.
Note: All parameters adjusted in the EXPRESS menu can be reviewed in the corresponding setting menus
(e.g. in the CAMERA menu).
If you close and re-open the EXPRESS menu, please note that the EXPRESS menu doesn't show the
adjusted values, but the default values!
41
Hide quick links:
Advertisement
Table of Contents
