Motion - EverFocus PARAGON 264x4-16 Instruction Manual

5.3.4 Motion

Camera: Select the camera you wish to adjust. "Title" will change to the title name of the selected camera.
Enable: Check box to enable motion detection. Other motion options will not be available unless this
feature is selected.
Log: Check box to record motion events in the log.
Matrix / Monitor: Assign the active camera to one of the programmable monitor outputs (1~4) and define
the reaction on the respective monitor when a motion event occurs:
No change: No change on the additional monitor display.
Spot: A full screen of the active camera will be displayed on the additional monitor.
VGA Monitor: Monitor display options when a motion event occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display on the main monitor.
Call Monitor: Monitor display options when a motion event occurs.
No change: No change on the call monitor display.
Full screen: A full screen of the active camera will display on the call monitor.
HD Monitor: Monitor display options when a motion event occurs.
No change: No change on the HD monitor display.
Full screen: A full screen of the active camera will display on the HD monitor.
Figure 5-5 Camera Menu – Motion
46