Table of Contents
Advertisement
5
7
5.4.2
Transmitting using sub-addresses (F-code transmission)
F-code transmission
Entering sub-addresses and passwords enables secure F-code box transmission and
F-code bulletin box transmission to be performed. First check the sub-address and password of the box reg-
istered in the other machine.
1
2
3
4
5
6
7
5-26
Downloaded From ManualsPrinter.com Manuals
Press [Yes].
% The F-code box list can also be printed from [F-Code Box List] in [List] after pressing <Setting>.
Load the document, and press <Fax>.
Press [Advanced].
Press [F-Code Tx].
Select [ON].
% Press [OFF] to disable the F-code communication settings.
Press [Enter] to complete the procedure.
Press the sub-address entry box.
Enter the sub-address registered in the other machine using
the numeric keys, and press [Enter].
% Up to 20 digits can be entered for a sub-address.
% To delete one of the entered characters, press [Clear].
% To delete all of the entered characters, press [All Clear].
If a password is set, press the password entry box.
% If a password is not set, proceed to step 9.
F-code communications
Konica Minolta 240f
5.4
Advertisement
Table of Contents
