Transmitting To Multiple Destinations (Broadcast) - Konica Minolta 240f User Manual

3.2 Advanced scan features
3.2.3

Transmitting to multiple destinations (Broadcast)

You can transmit to multiple destinations with a single operation. You do not need to scan the document re-
peatedly for each destination.
d
If you want to transmit to registered destinations, enable the Broadcast function.
If you want to specify destinations using other methods, you can specify multiple destinations even if the
Broadcast function is disabled.
You can change the default value to always have broadcast transmission enabled. For details, refer to
page 4-7.
The number of destinations that can be transmitted to for a single broadcast is indicated below.
Destinations
Address book destinations and groups
Manually entered e-mail addresses
Shared folders
FTP servers
User
Shared box
1
2
3
4
5
6
7
Konica Minolta 240f
Downloaded From ManualsPrinter.com Manuals
Load the document, and press <Scan>.
Press [Advanced].
Press [Broadcast].
% The broadcast function is enabled / disabled each time
you press [Broadcast].
Press [Close].
Specify the destination.
% For details on specifying the destination for Scan to e-mail, refer to page 6-3.
% For details on specifying other destinations, refer to page 2-3.
Repeat step 5 to specify all the destinations.
% If you specify a registered destination, that destination will
be canceled if you select it again.
% Press [Location] to confirm or delete the specified destina-
tions. For details, refer to page 6-15.
Press <Start>.
Number
2000
30
5
5
200
1
3
3-7