Speaker Distance - Onkyo PR-SC885 Instruction Manual

Advanced Setup—Continued

Speaker Distance

These settings are set automatically by the Automatic
Speaker Setup function (see page 52).
With the Speaker Distance settings, you can specify the
distance from each speaker to the listening position.
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
RECEIVER
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
ENTER
The Speaker Setup menu appears.
2.Speaker Setup
1.Speaker Settings
2.Speaker Config
3.Speaker Distance
4.Level Calibration
ENTER
5.Equalizer Settings
6.THX Audio Setup
3
Use the Up and Down [
buttons to select "3. Speaker Dis-
tance," and then press [ENTER].
ENTER
The Speaker Distance screen appears.
2-3.Speaker Distance
Unit
Left
Center
Right
ENTER
Surr Right
Surr Back R
Surr Back L
Surr Left
Subwoofer
Note:
• Speakers that you set to No or None
in the Speaker Configuration
(page 94) cannot be selected.
4
ENTER
ENTER
5
ENTER
]/[ ]
ENTER
]/[ ]
feet
6
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft 7
12.0ft
12.0ft
12.0ft
Note:
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
Use the Up and Down [
buttons to select "Unit," and then
use the Left and Right [
buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 0.2 to 30 feet in 0.2-foot
steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.06 to 9 meters in
0.06-meter steps.
Use the Up and Down [
buttons to select a speaker, and
use the Left and Right [
buttons to specify the distance.
Specify the distance from the speaker
to your listening position.
Notes:
• The Center distance cannot be set if
Center is set to None in the Speaker
Configuration (page 94).
• The Surr Right and Surr Left dis-
tances cannot be set if Surround is set
to None in the Speaker Configuration
(page 94).
• The Surr Back R and Surr Back L
distances cannot be set if Speaker
Type is set to Bi-Amp (page 44) or
Surr Back is set to None in the
Speaker Configuration (page 94).
• The Subwoofer distance cannot be
set if Subwoofer is set to No (step 4).
Repeat step 5 for each speaker.
Press the [SETUP] button.
Setup closes.
]/[ ]
]/[ ]
]/[ ]
]/[ ]
97