Getting To Know The Av Controller; Front Panel - Onkyo PR-SC885 Instruction Manual

Getting to Know the AV Controller

Front Panel

1
STANDBY/ON
PURE AUDIO
9
The actual front panel has various logos printed on it. They are not shown here for clarity.
For detailed information, see the pages in parentheses.
A
STANDBY/ON button (43)
Sets the AV controller to On or Standby.
B
STANDBY indicator (43)
Lights up when the AV controller is on Standby and
flashes while a signal is being received from the
remote controller.
C
ZONE 2 indicator (111)
Flashes when Zone 2 is being set. Lights up when
Zone 2 is on.
D
ZONE 3 indicator (111)
Flashes when Zone 3 is being set. Lights up when
Zone 3 is on.
E
Remote-control sensor (13)
Receives control signals from the remote controller.
F
Display
See "Display" on page 10.
G
DISPLAY button (77)
Displays various information about the currently
selected input source.
H
MASTER VOLUME control (57)
Sets the volume of the AV controller to –∞ dB,
–81.5 dB, –81.0 dB through +18.0 dB (relative dis-
play).
The volume level can also be displayed as an abso-
lute value. See "Volume Setup" on page 104.
8
2 3 4 5
STANDBY
ZONE 2
ZONE 3
AUDIO SEL DVD VCR/DVR CBL/SAT
J K
6
GAME/TV AUX 1 AUX 2 TAPE TUNER
Front flap
I
PURE AUDIO button and indicator (79)
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected. Pressing
this button again selects the previous listening
mode.
J
AUDIO SEL button (78)
Selects the audio input: analog, digital, HDMI, or
multichannel.
K
Input selector buttons (57)
Select the following input sources: DVD,
VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2,
TAPE, TUNER, CD, PHONO.
7 8
MASTER VOLUME
CD PHONO DISPLAY
PUSH TO OPEN
Push here to open
the flap