Component Video Input Setup - Onkyo PR-SC885 Instruction Manual

First Time Setup—Continued

Component Video Input Setup

2, 3
1, 5
PREV
CH
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 3, you must assign COM-
PONENT VIDEO IN 3 to the DVD input selector.
By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors (i.e., VCR/DVR, CBL/SAT, GAME/TV, AUX 1,
AUX 2, TAPE, CD, PHONO) are assigned to the "- - -"
option.
If you've connected your TV to the AV controller with a
component video cable, you can set the AV controller so
that composite video and S-Video sources are upcon-
verted ( ) and output by the COMPONENT VIDEO
*
MONITOR OUT 1 or 2. You can set this for each input
selector by selecting the "- - -" option.
Composite video, S-Video
Composite video, S-Video
1
Press the [RECEIVER] button,
RECEIVER
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press [ENTER].
ENTER
The Input/Output Assign menu
appears.
ENTER
48
INPUT SELECTOR
MACRO
1 2 3 ZONE 3
REMOTE MODE
DVD VCR CD ZONE 2
CDR/MD
1
TV CABLE DOCK RECEIVER
SAT TAPE/AMP
DIMMER SLEEP
2–4
+
CH
VOL
ENTER
DISC
ALBUM
-
DISPLAY MUTING
Component video
IN
( )
*
OUT
Component video
3
ENTER
ENTER
4
ENTER
ENTER
5
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO MONITOR OUT 1 or
2, the HDMI Monitor setting must be set to Main
or Sub (see page 45). See page 27 for more informa-
tion on video signal flow and upconversion.
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
]/[ ]
Use the Up and Down [
buttons to select "3. Component
Video Input," and then press
[ENTER].
The Component Video Input menu
appears.
1-3.Component Video Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX1
A UX2
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
IN3: Select if the video component
is connected to COMPO-
NENT VIDEO IN 3.
- - -: Select to output composite
video and S-Video sources
from the COMPONENT
VIDEO OUT.
Press the [SETUP] button.
Setup closes.
]/[ ]
IN1
---
---
---
---
---
]/[ ]