Table of Contents
Advertisement
First Time Setup—Continued
HDMI Input Setup
1
2
REMOTE MODE
DVD
VCR
TV
CABLE
SAT
DIMMER
2, 3
+
CH
DISC
ALBUM
-
1, 5
PREV
CH
DISPLAY
If you connect a video component to an HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned. The
following input selectors can be assigned: DVD,
VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2.
If you've connected your TV to the AV controller with an
HDMI cable, you can set the AV controller so that com-
posite video, S-Video, and component video sources are
upconverted (
) and output by the HDMI outputs. You
*
can set this for each input selector by selecting the
"- - -" option.
Composite video, S-Video,
component video
IN
OUT
Composite video, S-Video,
component video
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press
ENTER
[ENTER].
The Input/Output Assign menu
appears.
ENTER
3
ZONE
3
CD
ZONE
2
CDR/MD
1
DOCK
RECEIVER
TAPE/AMP
SLEEP
2–4
ENTER
VOL
MUTING
HDMI
(
)
*
HDMI
]/[
]
3
Use the Up and Down [
buttons to select "2. HDMI Input,"
and then press [ENTER].
ENTER
The HDMI Input menu appears.
1-2.HDMI Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
ENTER
AUX1
AUX2
4
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
ENTER
[
]/[
] buttons to select:
IN1: Select if the video component
is connected to HDMI IN 1.
IN2: Select if the video component
is connected to HDMI IN 2.
IN3: Select if the video component
ENTER
is connected to HDMI IN 3.
IN4: Select if the video component
is connected to HDMI IN 4.
- - -: Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
OUT.
5
Press the [SETUP] button.
Setup closes.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component
video upconversion for the HDMI OUT MAIN or
HDMI OUT SUB, the HDMI Monitor setting must
be set to Main or Sub (see page 45). See page 27 for
more information on video signal flow and upconver-
sion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See "Digital Input Setup" on page 49.
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
]/[
]
---
---
---
---
---
---
]/[
]
47
Hide quick links:
Advertisement
Table of Contents
