Error Messages - Onkyo PR-SC885 Instruction Manual

First Time Setup—Continued
7
After the 3rd and 7th measurements,
the following screen appears.
ENTER
Please select "Next", when measuring
next position, and select "finish",
when ending.
Next
finish(Calculate)
ENTER
Use the Up and Down [
buttons to select an option, and
then press [ENTER].
Next: Select this if you want to mea-
Finish (Calculate): Select this if you
8 When the measurements are
complete, the following screen
appears.
9
When the calculations are com-
plete, the following screen
appears.
ENTER
ENTER
Use the Up and Down [
buttons to select an option, and
then press [ENTER].
Save: Save the calculated settings
Review SP Config: Review the
54
Auto Speaker Setup
sure another listening posi-
tion. After the 8th
measurement has been taken,
the procedure automatically
proceeds to step 8.
don't want to measure any
more listening positions and
are ready to calculate the
results, then go to step 8.
Auto Speaker Setup
Calculating...
Auto Speaker Setup
Save
Review SP Config
Review SP Distance
Review SP Level
Cancel
and exit the automatic
speaker setup.
speaker configuration settings
(see "Reviewing the Results"
on page 56).
AUDYSSEY
]/[ ]
10
11
AUDYSSEY
Notes:
• When the automatic speaker setup is complete, the
Equalizer Settings (page 99) will be set to Audyssey.
• You can cancel the automatic speaker setup at any
point in the procedure simply by disconnecting the
setup microphone.
AUDYSSEY

Error Messages

During the automatic speaker setup, one of the following
error messages may appear:
❑ Ambient noise is too high
]/[ ]
Ambient noise is too high.
Retry
Cancel
This message appears if there's too much background
noise and the measurements cannot be performed prop-
erly. Remove the source of the noise and try again, or
cancel the automatic speaker setup.
Review SP Distance: Review the
speaker distance settings (see
"Reviewing the Results" on
page 56).
Review SP Level: Review the speaker
level settings (see "Reviewing
the Results" on page 56).
Cancel: Cancel the automatic speaker
setup.
If you selected "Save," the results are
saved, and the following screen
appears.
Auto Speaker Setup
Saving...
Disconnect the setup micro-
phone.
Auto Speaker Setup
Please unplug microphone.
AUDYSSEY
Auto Speaker Setup
AUDYSSEY
AUDYSSEY