Ending Calls - Aastra 9480i CT User Manual

Handling Calls
5. Call Party 3 for Conference 2.
6. When Party 3 answers, press the Conf Key to join Parties 1 (which is yourself ), Party 2, and Party 3 on Conference 2.
You now have two active conferences on two different lines.
Note:
When you are connected to multiple conference calls, and you put a conference on hold, the conference may be on
hold for a limited period of time before it is disconnected. Contact your System Administrator for more information.
If any party in a conference hangs up (including the party that began the conference), all other parties in the conference
are still connected.
Joining Additional Parties to Active Conferences
In centralized conferencing, you can join multiple incoming or outgoing calls to active conferences. Before following this
procedure, at least one active conference must exist on your phone.
1. As Party 1, pickup the handset or press the speakerphone key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf Key.
5. Press the Line Key that has the active conference. (For example, Line 1 and Line 2 both have active conferences. Pressing
Line 1 joins Party 1 and Party 2 to the conference on Line 1. Pressing Line 2 joins Party 1 and Party 2 to the conference
on Line 2.)
6. Press the Conf Key again to join the Parties to the active conference.
Ending a Conference and Transferring Remaining Parties
The 9480i CT allows a Host to drop from a 3-way conference and let the other two parties remain connected by pressing
a Transfer key.
Note:
The Caller ID of the dropped Host still displays on the remaining parties' phones.
If you are the Host of a conference and want to leave that conference:
• While in a 3-way conference press the Transfer key on the phone.
Your phone leaves the 3-way conference but the remaining parties are still connected to the conference.

Ending Calls

IP Phone UI
To end a call, you first need to connect or reconnect to the call if not already connected (for example, if your caller is on hold).
Goodbye
Press or the line/call appearance button of the active call to end the call. If connected through the handset, you
can also place the handset back on hook to end the call.
114
41-001381-00 REV01 – 06.2013