Aastra 9480i CT User Manual page 121
Hide thumbs
Also See for 9480i CT:
- User manual (218 pages) ,
- Specification sheet (2 pages) ,
- Administrator's manual (1184 pages)
Table of Contents
Advertisement
Setting Up a Conference and Adding Multiple Parties (for Sylantro and Broadsoft Servers)
Note:
You can have an unlimited number of parties in a conference (dependent on the limitations of the server.
1.
When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
Speakerphone Key.
A line opens up.
2.
Call Party 2 by dialing their number (or answer an incoming call of a Party).
3.
Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to Conference 1.
4.
Press the Conf Key. A new line opens.
5.
Enter the phone number of Party 3.
6.
Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the Conference 1.
7.
Press the Conf Key again to add Party 3 to Conference 1. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to Conference 1.
8.
Press an available Line Key (or answer an incoming call on an available line). If calling out, call Party 4.
9.
Wait for Party 4 to answer. When Party 4 answers, you can consult with them before adding them to the conference.
10.
Press the Conf Key to add Party 4 to Conference 1.
11.
Press the Line Key that has Conference 1.
12.
Press the Conf Key to join all parties (Parties 1 through 4) on Conference 1.
13.
To add more parties, repeat steps 8 through 12.
If any party in the conference hangs up (including the party that began the conference), all other parties in the conference
are still connected.
Setting Up Multiple Conferences (for Sylantro Server only)
Note:
The 9480i CT is limited to 9 conferences (a single conference each on lines 1 through 9).
1.
Start Conference 1 using the procedures in the previous section,
Parties (for Sylantro and Broadsoft Servers)"
2.
When you are finished adding all required parties to Conference 1, press an available Line Key to start Conference
2. You are Party 1 on Conference 2. Call Party 2.
3.
When Party 2 answers, press the Conf Key.
4.
Press an available Line Key.
41-001381-00 REV01 – 06.2013
John Smith
L2
>7788
Dial
Conf
Xfer
"Setting Up a Conference and Adding Multiple
on
page
113.
Handling Calls
113
Advertisement
Table of Contents
