Aastra 9480i CT User Manual page 169

Keys Used for Editing
During alphanumeric entry, the Volume Control key
capability to the unit. For Backspace/Erase, press the Lower end of the volume bar. To add a space or to erase from left to
right, press the higher end of the volume bar.
Note:
The Down scroll key (marked Â) or the Up scroll key (marked Ï) are also used to provide backspace and forward
space respectively.
General Entry Editing
To accommodate adding and editing, use the available characters as labelled on the keypad. Pause key and special charac-
ters are also available.
0
Key / Pause key
To allow the user to enter pause characters, the pause key is the 0 digit key in alphanumeric editing mode. Characters
appear in the following order: : 0, p.
1
Key
In the alphanumeric mode, the 1 digit key accesses several special characters. Characters appear in the following order:
1 @ . :
As can be seen, these special characters accessible through the 1 key allow URI and IP address data entry.
Note:
To enter the dot/period in the IP address format, the star
tively, in text "abc" or "ABC" editing mode, use the
41-001381-00 REV01 – 06.2013
becomes the edit key. It provides backspace and forward-space
; = _ ,
*
1
key to access the "
Accessing Options on the Cordless Handset
- ' & (
key is used when in numeric "123" editing mode. Alterna-
.
".
)
161