Conferencing Calls; To Create A Conference Call; To Conference Two Calls You Are Already Connected To; Ending Calls - Aastra A1720-0131-10-05 User Manual

line to speak with the party before
pressing k again. To cancel
the transfer, select Cancel on the
display screen.

Conferencing Calls

The 9133i phone system supports up
to 3 parties (including yourself) in a
conference call.

To create a conference call

1. Connect to the first party you wish
to include in the conference (if not
already connected).
2. Press l. A new line opens.
2
3. Enter the extension number, or dial
the outside number of the person
you wish to add to the conference.
4. Wait for the new party to answer.
You can consult with the new party
first before adding them to the
conference.
5. To add the new party to the
conference, press l again.
6. To drop a party from the conference,
press l once more.
7. To exit the conference leaving the
other two parties connected,
disconnect by placing the handset
back on-hook or by pressing N.
You can use V W to scroll through
and see the numbers and names (if
available) of the parties in the
conference call.
To conference two calls you are
already connected to
1. Begin with active calls on two dif-
ferent lines.
2. Press l. A new line will open.
Model 9133i SIP User Guide
3. Press the line key of the call you
4. Press l again. The two lines
NOTE: When a name is displayed, press-

Ending Calls

To end a call, you first need to
reconnect to the call if not already
connected (for example, if your caller
is on hold). Press Nto end the call.
If connected through the handset, you
can also place the handset back on
hook to end the call.
=Dial
wish to conference with.
link into a conference call.
ing U drops the displayed party
from the call.
11