Line Key - Aastra 9480i CT User Manual

Line Keys and Softkeys

Line Key

You can set a softkey to act as a line/call appearance key on the 9480i CT. This key acts as a line that behaves the same as
a hard line key (L1, L2, L3, and L4). For more information about the behavior of line keys, see
Appearances" on page 48.
If you configure line keys for the softkeys, the status of the lines/call appearance keys appear on the phone's display as
shown in the following image.
Icons next to the softkeys on the phone's display indicate the status for that line or call. The following table provides a
description for each icon.
Activity
Connected
Ringing
On Hold
Depending on how the phone has been configured, the maximum number of total line/call appearances that can be
configured is 9 (4 line/call appearance hard keys plus 5 softkeys). If all line/call appearances have been set up between
two different numbers, a total of 8 lines can be configured.
This means that when all line/call appearances are in use, 1 call is connected while the rest are on hold. No further outgo-
ing or incoming calls can be made until one of the line/call appearances becomes available.
54
1
L5
L6
L7
Sat Jan 1 12:18am
Services
Dir
Callers
Softkey Line/Call Appearance Lights
Light Icon
There is no call activity for the line/call appearance
Idle Solid
softkey.
A call is connected to your phone on this
line/call appearance softkey.
Solid
The equivalent on a line/call appearance hard key
is a solid green light.
A call is ringing at your phone on this line/call
appearance softkey.
Flashing
The equivalent on a line/call appearance hard key
is a fast flashing green light.
A call is on hold on your phone on this line/call
appearance softkey.
Flashing
The equivalent on a line/call appearance hard key
is a slow flashing green light.
John Smith
L8
L9
Icom
Definition
"Multiple Line and Call
41-001381-00 REV01 – 06.2013