Aastra 9480i CT User Manual page 180

Pairing and Unpairing Cordless Handset to Base
Unpairing the Handset from the Base Station Using the Handset UI
Handset UI
Notes:
1. Ensure the Handset being unpaired is within close proximity to the base station. It is recommended that the Handset
be within 3 feet from the base station during unpairing. If the Handset is out of range, and you perform unpairing from
just the Handset, the Handset is unpaired, but the base station remains paired. If communication between the base sta-
tion and the Handset is lost, you must perform unpairing on the base station as well.
2. Unpairing of the Handset returns it to factory default state. All data, including the functions in the Feature key, are
removed.
On the Handset, press  (Menu).
1.
2. Select Hset pairing.
Note:
If the Handset is not paired, the softkey is labelled as Pair instead of Remove.
Press the Remove softkey.
Upon success or failure of unpairing, one of the following screens displays on the Handset.
172
7 - Hset pairing
= Scroll
Remove
Attempting to
remove...
Cancel
Removal
successful
Successful Removal Attempt
Removal failed
Try again
Cancel Remove
Failed Removal Attempt
41-001381-00 REV01 – 06.2013