Managing Calls
The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP
Phone.
Key LED Behavior
for All Modes
CFWD key LED
RED
if CFWD All, CFWD Busy, or CFWD
No Answer is enabled for the account in focus.
CFWD key LED OFF if any CFWD mode is disabled.
Note:
If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to
see the changes.
Configuring CFWD Using the Aastra Web UI
Aastra Web UI
Use the following procedure to configure CFWD using the Aastra Web UI.
Note:
(Optional) You can configure a Call Forward key on your phone to access the Call Forward menus if desired. If you do
not configure a Call Forward key, you can still access the Call Forward menu from the IP Phone UI at the path, Options-
>Call Forward.
1.
(optional) Click Operation->Softkeys and XML.
Softkeys
2.
Select from "Key 1" through "Key 20".
3.
In the "Type" field, select Call Forward from the list of options.
4.
(optional) If required, enable or disable the applicable states for the Call Forward key (Idle, Connected, Incoming,
Outgoing, and/or Busy).
5.
Click Save Settings.
134
MWI LED Behavior
for All Modes
MWI LED ON if current account in focus has CFWD ALL
enabled.
MWI LED OFF if CFWD All is disabled.
41-001381-00 REV01 – 06.2013