Aastra 9480i CT User Manual page 176

Pairing and Unpairing Cordless Handset to Base
3. Choose Pair and press Select.
The following displays on the handset.
Note:
If the Handset is not paired, the base station softkey displays as Pair instead of Remove.
On the Handset, press Â.
4.
5. Select Hset Pairing.
Note:
If the Handset has already been paired, the softkey is labelled as Remove instead of Pair.
Ensure the Handset being paired is within close proximity to the base station. It is recommended that the Handset
be within 3 feet from the base station during pairing.
Note:
It is recommended that you execute the following steps 6 and 7 at the same time.
168
Handset Pairing
Pair
Remove
- Select
Cancel -
Done -
Handset Pairing
Attempting to pair.....
Cancel -
Done -
7 - Hset pairing
= Scroll
Pair
41-001381-00 REV01 – 06.2013