Listening To The Radio - Onkyo DR-90 Instruction Manual

Onkyo dvd receiver instruction manual dr-90
Hide thumbs Also See for DR-90:
Table of Contents

Advertisement

Listening to the Radio

There are two ways to select radio stations: one is manual tuning and
the other is presetting radio stations then selecting the preset channels.
STANDBY/ ON
STANDBY
POWER
ON
OFF
PHONES
SPEAKER
PRESET /
DISPLAY
SETUP CH LEVEL
MODE ADJ
MODE
Tuning Manually
You can tune manually only with the buttons on the DVD
Receiver.
1
Press FM or AM to select the band.
F M
A M
2
Press TUNING
frequency.
TUNING
• The frequency changes in 50 kHz steps
in FM and 10 kHz in AM each time you
press TUNING
• In FM, if this button is held
continuously for more than 0.5
seconds, the frequencies are scanned
automatically–FM auto tuning mode.
When a broadcast is received,
scanning stops.
Tuning in a weak frequency
(only for FM stations)
When you tune in a stereo FM station, the FM STEREO
indicator lights up if the signal is sufficiently strong.
If the signal is weak,
you may not be able
to tune to the station.
In this case, tune in
as follows.
FM MUTE
Press FM MUTE.
The FM MUTE indicator turns off. At this
time, the station will be in mono and
interstation noise will be heard.
Select the station to which you want to listen.
26
MASTER VOLUME
OPEN/CLOSE
DOWN
UP
PAUSE
STOP
PLAY
SURROUND
Re - EQ
MODE
VIDEO 1
VIDEO 2
DVD
INPUT SELECTOR
LATE NIGHT
TAPE/MD
T V
F M
A M
BASS
PRESET
ENTER
TUNING
MEMORY
FM MUTE
2
FM MUTE
1
/
to change the
/
.
STANDBY/ ON
STANDBY
POWER
ON
OFF
TREBLE
PHONES
DISPLAY
Presetting Radio Stations
• You can preset up to 30 stations.
• You can preset radio stations only with the buttons on the
DVD Receiver.
1
2
PRESET
MEMORY
3
ENTER
4
PRESET /
MODE ADJ
5
ENTER
Receiving RDS
When an RDS (Radio Data System) station broadcasting PS
(Program Service Name) information is received, the RDS
indicator lights up and the name of the station is displayed.
(RDS reception is only available in areas where RDS
broadcasts are available.)
OPEN/CLOSE
DOWN
UP
PAUSE
STOP
VIDEO 1
VIDEO 2
DVD
INPUT SELECTOR
TAPE/MD
T V
F M
A M
SPEAKER
PRESET /
PRESET
SETUP CH LEVEL
MODE ADJ
ENTER
TUNING
MEMORY
FM MUTE
MODE
4
3,5
2
Tune in the radio station you wish
to preset (see steps on the left).
Press PRESET MEMORY.
"PRESET IN" appears in the DVD
Receiver's display.
While "PRESET IN" is lit in the
display, press ENTER.
The MEMORY indicator lights up in the
display.
While the MEMORY indicator is lit in
the display, press PRESET
select the channel number to which
you wish to register the radio
station.
Press ENTER.
The radio station is registered to the
preset channel.
To register another preset station, repeat
steps 1 to 5.
MASTER VOLUME
PLAY
SURROUND
Re - EQ
MODE
LATE NIGHT
BASS
TREBLE
/
to

Advertisement

Table of Contents
loading

Table of Contents